OVERVIEW

Our Explosion-Proof Lamps are constructed and tested in accordance to the strictest requirements of the industry; to fully satisfy the intentions of use in explosive gas and dust atmospheres.

 

Our first ever explosion-proof luminaires are built with Solid State Lighting Technology that actually surpasses the design and performance of conventional lighting systems; attaining longer service life even at high temperature conditions.

 

BENEFITS

  • Constructed To Endure The Harshest Environmental Conditions – Hot & Cold Temperature Operations; Corrosion-Prone, Water Immersion and Dust Populated Conditions
  • Low Maintenance – Very Suitable For Limited Accessibility Locations
  • High Luminance Light Output – Suitable For High Level Mounting Installations
  • 24/7 Constant Non-Stop Illumination For Continuous Critical Operations
  • 50,000-Hour ( Minimum ) Total Product Service Life
  • Low Energy Consumption – Up To 5 Times Less Than Incandescent Lighting
  • Instantaneous Start-Up – Compared to HID
  • Optional Colour Temperature – From Warm White to Cool White
  • Reduced Carbon Footprint
  • Mercury-Free Materials
  • Effective Heat Dissipation – Contributing Further To The Already Achieved Longest Product Life Cycle
  • Supplement Anti-Glare Glass Cover – For Total Light Efficiency
  • Product Performance Evaluation – Tested Beyond 2 Million Cycles of “Off and On” Switching Operation
  • Consistent Quality and Cost-Effectiveness
  • Customization At Its Best

 

PROTECTION CLASSES

 

    IEC IECEx

    • Ex d IIB + H2 T6…T4 Gb
    • Ex tb IIIC T55⁰C…T105⁰C Db

     

         Standard(s) For Safety

    • IEC 60079-0 : 2011 - Explosive Atmospheres – Part 0 : General Requirements Edition: 6.0

     

    • IEC 60079-1 : 2014-06 - Explosive Atmospheres – Part 1 : Equipment Protection By Frameproof Enclosures “d” Edition: 7.0

     

    • IEC 60079-31 : 2013 - Explosive Atmospheres – Part 31 : Equipment Dust Ignition Protection By Enclosure “t” Edition: 2

     

    ATEX

    • II 2 G Ex IIB + H2 T6…T4 Gb

    • II 2 D Ex tb IIIC T55⁰C…T105⁰C Db

     

        Standard(s) For Essential

        Health And Safety

        Requirements

    • EN 60079-0 : 2012   
    • EN 60079-1 : 2007
    • EN 60079-31 : 2009

     

    Standards Press Of China

    GB Standards

    • Ex d IIB + H2 T6…T4 Gb

    • Ex tD A21 IP64 T55⁰C…t105⁰C

     

        Standard(s) For Safety

    • GB 3836.1 - 2010
    • GB 3836.2 - 2010
    • GB 12476.1-2013

    • GB 12476.5-2013 / IEC 61241-1:2004

    Mareh 100 - P90

    SKU: JS-P90R1219-10-3000K
    • Applicable Locations:

      • Oil Refinery Complexes
      • Petrochemical Complex and Plants
      • Combustible Vapour, Dust and Fiber Facilities
      • Oil and Gas Terminals and Storages
      • On-Shore and Off-Shore Exploration Sites
      • Off-Shore Platforms (Oil and Natural Gas)
      • Floating Storage Re-Gasification Unit (FSRU)
      • Floating Liquefied Natural Gas (LNG) Vessels
      • Transportation of Natural Gas
      • Paint Production Facilities

       

      Classified and Hazardous Zones:

      • Zone 1,  AEx d IIC
      • Zone 2
      • Zone 21,  AEx tb IIIc
      • Zone 22

       

      Specifications:

      • Dimmable – No
      • LED Type - High Luminous Flux “AC-IN” Type LED Modules
      • Lamp Beam Angle - 110° (Degrees)
      • Lighting Colour Temperature - 3,000 K CCT ± 10%
      • Colour Rendering Index (Ra) > Ra80
      • Luminous Flux – 8,000 lm
      • Luminous Efficacy – 100 lm/W
      • Rated Lamp Life – 50,000 Hours

       

      • Power of Lamp – 80 W
      • Line Input Voltage – 220 Vac ~ 240 Vac
      • Line Input Frequency – 50 Hz / 60 Hz
      • Power Factor > 0.95

       

      • Lamp Diameter – ∅189.0 mm
      • Lamp Length – 395.0 mm
      • Reflector Diameter – ∅371.0 mm
      • Aluminium Alloy Housing
      • Stainless Steel Screws
      • Tempered Glass – IEC Standards Impact-Resistance > 4 Joule

       

      • NEMA 6/6P
      • Ingress Protection – IP67 / IP68
      • Operating Temperature : - 65°C ~ + 95°C